Skip to main content

Residential Insulation Applications

Attic

Energy Shield Residential Insulation will fill every crack and crevice, and help to insulate and waterproof your attic. This will not only save you on energy costs, but it will reduce internal damage from water.

Walls

Energy Shield Residential Insulation creates a seamless air barrier, keeping the air and heat in, which means more efficient use of your heater and AC units, they work less, the insulation works more.

Crawlspace

This will insulate your floors from the elements below, including rising heat.

Basement

Basements are typically cooler, if it’s a finished one, that means that your heater has to work twice as hard to keep the temperature where you want it, our insulation will correct that, and keep the temperature stable.

Garage

Thermal drift is where heat flows through the walls and seams. Our spray foam can keep the garage the temperature where you want it. Who likes a too cold or too hot car?
spray foam insulation

How Energy Shield Insulations Helps Your Home

Eliminates Energy Loss From Air Leakage

Energy loss occurs from air leaking through gaps, seams, and cracks in walls, windows, doors, and ceilings. When cold air enters through these small openings, an equal amount of conditioned air (you’ve already paid for) is forced out. This makes your HVAC system work harder, making your bills more expensive. Energy Shield Residential Insulation will fill those gaps, creating a seamless air barrier. Keeping your paid for and conditioned air where it belongs, inside your home.

It's Environmentally Responsible.

Yeah, it’s environmentally responsible to use Energy Shield Residential Insulation. It reduces electricity consumption by 37 billion kilowatt hours. It reduces fuel oil consumption by 12%, and propane use by 10%. It also leaves less of a mess, and less waste filling the landfills. Energy Shield Insulation is the responsible way to go.

Did you know that 9 out of 10 homes are under-insulated? Don’t be one of the 9, get your home energy efficient, and save some money, call now.

It Has a Higher R-Value

The R-Value measures how much heat the insulation will let flow through it. Depending on the thickness of your wall structure, and the foam density, our R-Values are between R6 R6.5 per inch. While standard Fiberglass Batts and Blankets have an R-Value of 3.0 to 4.0 per inch.

Huge Cost & Energy Savings.

The Closed-Cell Spray Foam we use fills the crevices, cracks, and seams, this creates an air barrier, a moisture barrier, and with the R-Value, it’s density means that it will stop air, heat, and water from getting in. You can easily see a $300 to $800 difference in your energy costs a month, that’s a new car, TV, or retirement savings of $3,600 to $9,600 a year.

It's Worry Free

Yes, it’s worry free – you can rest assured that your substructure won’t rot, crack, or leak, at least from the walls, it won’t. It will keep maintenance needs low, and won’t need to be repaired or replaced during the lifetime of the home.

You Can Insulate Your Entire Home.

Yep, you sure can. Our closed-cell foam can be used in the attic and crawlspaces, and our 10lb foam can be used on the walls. What’s this mean? You’re surrounded by a material that will keep the weather, water, air, and even the bugs out.

No Obligation Quotes

You can have one of our trained technicians come out, inspect your building and provide you with a free quote. No obligation to buy.

So Many Applications

Energy Shield Residential Insulation has many different applications. From interior and exterior walls to trucks and vans, to water storage tanks & duct work.

It works like this:

We only work on full-renovations and on new homes that are in the building process. The first step is to make sure all of electricity and plumbing is done flawlessly. Next, we spray on the seamless and strong spray foam. It will fill the gaps, and then we cut it even to the wall structures, making a clean, neat and good appearance. Then your walls are put on. Finally, you get less heat, cold, noise, water and energy costs forever.

On a new home or an addition, our spray foam is installed at the edge of the building envelope. This allows for a seam to seam residential insulation. There are roof penetrations in home building, normal insulation can’t fill those areas well. Our spray foam will fill the area and give the benefits there as it does everywhere else. It will end drafts and help control temperatures to keep you comfy. It will even turn down the outside volume! It’ll act as a noise barrier and keep the hum of traffic to a low, so you can rest easy.

What happens after Energy Shield Insulation is applied.

Since you’re not paying to heat or cool the outside anymore, you’ll save a bunch of money on energy costs. Energy Shield Residential Insulation is an air-tight, moisture proof, FEMA class 5 flood-resistant material you can use to make your home safer, and less expensive to live in.

Johnson Home

  • Investment: $10,650
  • Annual Savings: $3,238
  • ROI Time: 41 months
  • 20 Year Savings: $54,110
  • ROI: 508%

What We Did

Besides the cost savings, we gave Joe a draft-free, temperature stable, energy-efficient, comfy and cozy home. And the insulation will never need to be replaced.

Nagel Home

  • Investment: $13,920
  • Annual Savings: $5,947
  • ROI Time: 33 months
  • 20 Year Savings: $105,020
  • ROI: 754%

What We Did

They spent $98,000 on their total remodel costs, our insulation alone was able to help them recoup 61% of their total renovation costs, and improve their quality of life.

Free Quote & Inspection

You can have one of our trained technicians come out, inspect your building and provide you with a free quote. No obligation to buy.