Sterling Heights Roof Repair
MAYBE IT’S A LEAK
The Problems You’re Experiencing
Whether you have a metal or a flat roof, they come with a variety of issues. From leaks and sagging to losing that comfortable air conditioning. With many roof surface coatings, seams and holes may appear from fasteners and joining, these seams and holes eventually grow as the temperatures fluctuate causing them to expand and contract, eventually leading to leaks.
Energy Shield’s spray polyurethane foam helps fill those holes, gaps and seams that are caused by wear and tear from weather conditions. This lightweight and seamless insulated air barrier will last a lifetime.
THE SOLUTION TO YOUR LEAKING FLAT ROOF.
When a roof starts to sag, the water from the snow and rain will pool in one area. This eventually wears down the roofing material and penetrates the surface. Next thing you know, you’re moving buckets over your shop floor to avoid cleaning up a leak. When your Sterling Heights roof is in need of repair from cracks in the tar or hales from fasteners, air can escape through your roof, making your HVAC system run twice as hard and costing you more money.
At Energy Shield we care deeply about the environment and want to make every effort we can to reduce our footprint. This means that your roof restoration will contribute towards reducing landfill usage and reducing your own footprint.
Superior Protection from the Elements
So, what’s so special about Energy Shield? Our silicone roof coatings are seamless, waterproof, and form a weather-tight seal over your existing roof. This coating will stop your leaks and won’t break down, even in permanent standing water. Our silicone coating is also highly reflective to stop and reflect ultraviolet rays from damaging your roof as well. We can even apply this solution to metal roofs for an economical and responsible solution for the typical rusting problems of a metal flat roof.
”Our 20-ton AC unit was out most of the summer. We had to rely on the four 5 ton units to keep the place cooled down. Because of the insulating qualities of the foam, we were able to keep the place cool with half of our systems out.
Gary BenningPresident, Airway Enterprises
Does your roof look like this?
Then you need to give us a call at (248) 332-2910
No tear-offs. It could cost you $20,000 to tear off a 10,000 square foot roof, so why not renew it and save?
Huge cost savings – no tear offs
Why remove and rebuild your Sterling Heights roof when you can repair and renew it? A tear off is expensive, affects productivity, your downtime, and your tenants. With a spray foam solution, you will be able to keep everything running while saving on labor costs. You also help the environment by keeping landfills clear.
Roof tear offs are getting more and more expensive, and with so many different materials to choose from, the choices can get confusing. Depending on the size of your roof and the materials it is made of, a 10,000 square foot roof removal and disposal could cost you between $20,000 to $30,000. Tack on those new roof costs and you’re looking at $60,000 to $100,000 for 10 years of protection without any energy saving benefits.
We can apply it to virtually any roof
From built-up roofing to mineral cap sheets to weathered single-ply membranes, our silicone roof coatings can be sprayed on top to cover any seams or holes while stopping leaks and completely renewing your roof.
Spray Foam Flat Roofing Composition
1
Weather Protection
Weather-resistant silicone protects against temperature exrtremes and ultraviolet rays.
2
Granules
The granules increase fire resistance, traction and durability. They will also help to protect the coatings from hail and other damage.
3
Insulation Barrier
Energy-efficient polyurethane foam has an R-Factor of 6.8 per inch, and is water-proof.
Silicone Roofing Composition
Weather Protection
Weather-resistant silicone protects against temperature exrtremes and ultraviolet rays.
Granules
The granules increase fire resistance, traction and durability. They will also help to protect the coatings from hail and other damage.
Insulation Barrier
Energy-efficient polyurethane foam has an R-Factor of 6.8 per inch, and is water-proof.
What a spray foam solution will do
Energy Shield’s spray foam flat roof repair systems will fill the gaps and seams in regular flat roofs, and cracks caused by wear and tear from weather conditions. We create a seamless, lightweight insulated air barrier over your roof that’ll last a lifetime.
35% of your air loss is through the roof.
As air (cold or hot) enters the building, an equal amount is forced out, leading to air loss. Your HVAC system has to work twice as hard to keep the temperature stable. And up go your energy bills.
Energy Shield’s spray foam roofing systems create a seamless air barrier and fill any holes and seams. We stop the air loss through the roof as well as wear and tear on your HVAC system. 35% of your air loss is through the roof, which means your energy bills are through the roof. Let’s put a stop to that.